Diesel Generator main power and standby power use

Diesel Generator, also known as the master with the power of continuous power or a long line of power in the country, are generally used to identify the main use Power Diesel Generator, and in the international arena is also used backup power, also known as the greatest power to identify Diesel Generator, the market [...]

Single phase Motor

Single phase Motor is only one winding, the rotor is a squirrel cage type. When the single-phase sinusoidal current through the stator windings, the motor will generate an alternating magnetic field, the magnetic field strength and direction of change at any time intercropping sinusoidally, but the orientation in space is fixed, it is also known [...]

Centrifugal Pump flow adjustment

Centrifugal Pump flow adjustment

Of a pump, the characteristic curve will not change, while the variable pipeline characteristic curves. When the pump’s operating point provided by the traffic does not meet requirements under the new conditions of flow, which should try to change the location of pump operating points, namely, the need for [...]

Water Pump of the six basic performance parameters

Water Pump The basic performance parameters and the significance of Water Pump Model

1, Water Pump of the six basic performance parameters of

Water Pump basic performance, usually by six parameters that can be personalized.

1. Flow (pumping)

Do not pump in the unit volume of liquid within the carrier. With [...]

Diesel generator Common mistakes

Diesel generator Common mistakes

Diesel Generator misuse can seriously affect the service life of Diesel Generator sets, let’s look at the daily life of Diesel Generator sets error mode of operation what?

Operation of a Diesel Generator Error: diesel engine oil is insufficient operational

At this point a result of shortage of oil [...]

Three-phase Motor

Three-phase Motor refers to the three-phase stator windings when the motor (all a difference of 120-degree electric angle), which leads to three-phase alternating current, it will produce a rotating magnetic field, the rotating magnetic field cutting the rotor windings, resulting in the rotor windings generate induced current (rotor winding is a closed path), the rotor [...]

Factors affecting the efficiency of centrifugal pump

Centrifugal Pump Unit by affecting the efficiency of the factors analysis and propose improvement measures to enhance the Centrifugal Pump operational efficiency and reduces energy consumption.

1, affecting the efficiency of Centrifugal Pump group of several factors

Centrifugal Pump efficiency is mechanical, hydraulic three kinds of volume and efficiency of the product. The [...]

Knowledge of small electric cars points: Drive mode and Electric Motor

In addition to wheel-hub-driven approach what other way?

Japanese electric vehicle in most cases, the shaft-driven approach for two main reasons: First, Japan’s electric bicycles under the law must be based on human resources to support the output of electricity and must therefore be measured foot force installation of the axial force measurement bodies [...]